



















No-Prep Instant Primer
- 1 Gal. Gel based fusion primer
- No need to prep the floor. Spray on application
- Apply with garden type sprayer





Dimensions
Product Thickness | 0.4 – 0.9 mils Dry | Container Size | 1 Gal |
---|
Details
Commercial / Residential | Commercial / Residential | Approx Coverage | 300 – 400 sq ft/gal *rates vary depending on surface; See TDS for full coverage chart |
---|---|---|---|
Application/Installation Method | Acetone-proof pump sprayer with a cone tip | Coating Type | Single component sol-gel based fusion primer |
Min Optimal Temp | 50 °F | Max Optimal Temp | 80 °F |
Substrate/Surface Material | Can be applied on coated or uncoated concrete, rubber, plastic, fiberglass and glass, porcelain, painted or unpainted iron; aluminum, copper and other metals; hot rolled steel, cold rolled steel, stainless steel; powder-coated and galvanized surfaces | Dry To Touch Time | 90 Minutes |
Time before Recoating | 5-90 minutes | DIY Friendly | Yes |
No-Prep Instant Primer | Revolutionary Concrete Bonding Solution
Skip the Grinding & Etching with Nano-Tech Fusion Technology
Can't or don't want to grind or etch? Epoxy Central's No-Prep Instant Primer is a revolutionary single-component, nano-tech fusion primer designed for seamless application directly onto surfaces with little to no prep. This isn't just a fast-drying primer—it's an instant primer! No-Prep Primer serves a dual purpose as both a surface primer and an adhesion enhancer. This remarkable primer establishes a permanent molecular connection between the coating and the substrate, which then can immediately be coated over with any Epoxy Central epoxy system.
Save Time & Money on Surface Preparation
No-Prep Primer eliminates the need to prep by etching or grinding, saving significant time and money. It's ideal for environments where dust created by grinding or shot blasting is an issue or when downtime is critical. Allows you to easily prime and epoxy in one day!
Quick & Simple Application Process
Once applied with an acetone-rated pump-type sprayer BUY HERE simply wait 10-15 minutes for the No-Prep to get "tacky" and then apply your coating. Virtually any coating (except water-based epoxies) can be applied to Epoxy Central's No-Prep Instant Primer. This versatile product can be used as a standalone primer on bare concrete, or as a primer to ensure adhesion to an existing coating that is being recoated.
Unmatched Adhesion Strength
Epoxy Central's No-Prep is so strong that adhesion tests have proven that the concrete surface will fail before the primer will delaminate! The simple one-part formula requires no mixing.
Product Details
- Sold in 1-gallon units
- Coverage: 300-400 sq ft/gallon
- If ordering a sprayer, buy 1 gallon with sprayer, add to cart and continue shopping, and order additional gallons as needed without the sprayer. For very large floors, we recommend two sprayers.
PLEASE NOTE THAT DUE TO SHIPPING RESTRICTIONS THIS PRODUCT IS NOT RETURNABLE AND CANNOT BE SHIPPED TO CA.